Everything you ever wanted to know about annunciators

 I have always had an interest in antique annunciators.  Ever since I was a kid and saw my very first wood buzzer in the James J Hill house I wanted to know more.  The annunciators were first introduced in homes in Europe in the late 1700s.  At this time it was simply pulls in each room which connected to cables that would then ring to a large bell station in the kitchen,



This however required one to look at which bell was moving most recently to discern which room needed assistance.  A better system had to be invented.  When the battery was first invented in 1800 uses for the technology took off in many forms.  The telegraph to name one.  The battery also allowed a newer and better way for annunciators.  With the battery one could use a single box and use waving flags or moving boxes to indicate which room required assistance which was much easier.  Here are numerous images of annunciators and also early burglar alarms.

Stunning 1889 burglar alarm restored!

Catalog examples

The lever on the bottom is to reset after the room buzzer is pressed the needle remains up until reset.





Look at the choices one had with a hotel annunciator as to any need. Perfect to let them know exactly what you need before the advent of the phone:

Window man? What you can call to get your windows washed? Sign me up!!1



Hotel annunciator and burglar alarm in 1!





So lots of examples...
Few more points.  The below example and one above are examples of American call boxes.  Typically they had magnetic arrows that raised the arrow. Then the reset button would need to be pulled.



Below are European examples where the flags simply shake back and fourth when the circuit is closed via push of the call button.



Now what if I'm at the dining room table and I need more wine but I don't want to get up from my chair?  I need something to simply tap my foot. Oh here it is:

The floor key could also be removed and wired to put the push button on the underside of the table.  I have yet to decide which option I'll pick when I get to the dining room.

What if you love your bell box but you think it's just a little too loud?  Simply put it in another highly decorative case and you're set!



Lastly an interesting read from Western Electrician 1888.



Chapter XXXVIII.
Push Buttons.
The range of style, shape and construction of push buttons is almost limitless. They are made both in wood and
[graphic][merged small][graphic][merged small][graphic][merged small]

[merged small][graphic][merged small][merged small][graphic][merged small][merged small][merged small][graphic][merged small][merged small][graphic][merged small][graphic][merged small][graphic][merged small][merged small]
quently by needles which change from their normal position when they are actuated by the closing of a circuit, as indicated in Fig. 50, where it is plain the attendant is desired in the auditor's office, and Kig. 51 where calls are recorded from rooms 9, 29 and 50; frequently the call is recorded by a drop or shutter which normally is in a nearly vertical position but when the circuit is closed by pressure on a push button the drop falls and discloses a number or name.
In the illustration shown, each individual annunciator, as distinguished from the whole instrument which is also
[graphic][ocr errors]
called an annunciator, consists of a little electro-magnet, and an armature which is attracted when circuit is made by pressing the corresponding push button; as soon as the armature moves, a little lever is released which turns over by its own weight and moves the pointer on the face of the annanciator. A vibrating bell connected in the return wire, leading to the battery, rings at the same time After the attendant has noted who has called, he moves a lever on the bottom of the annunciator box which pushes the little lever again in its place so it is held by the armature of the electromagnet. There are innumerable constructions but the principle is the same in almost all of them.

Close up of illustrations :




Eventually annunciators made their way out of the homes with the demise of the servant. The concept however still survives today although in of course different modes and requirements. Can't think of much else to say on the subject.  Anyone have any thoughts or additions?

Also if you know where I can find a floor buzzer key let me know.  Mine seems to be missing a few pieces. 


If you like what you read on my blog and would like to contribute to the house restoration please click the donate button below. All donations will be GREATLY appreciated!!









Comments

  1. Working on house with Butler call box would like to know if you have any wire diagrams for 8 room call box . Transformer located in basement.
    Thank You Paul
    agowan@verizon.net

    ReplyDelete
    Replies
    1. Sorry Paul but I do not have a diagram. Honestly when I tested out my box with all the buzzers I do it by trial and error. Simply put one wire from the buzzer goes to the box and the other wire from the button goes to the transformer and from the transformer a wire leads back to where the wire from the button in the box thereby completing the circuit. Same concept for adding more rooms from there. Hopefully that helps a little bit.

      Delete
  2. Antique Annunciator Author:

    The unit shown above the line: "Look at the choices one had with a hotel annunciator as to any need" has flags, and it appears 6 push buttons. What are the two metal objects on the side? One of them appears to be a switch that can be pressed and made contact. But what is it's purpose?

    Thanks

    ReplyDelete
    Replies
    1. Hi Paul,

      Hard to saw what they are when we don't have an example in front of us. Were they simple wood finials for decoration or to open the case? I can't say. What do you think they were for? Hard to speculate whether they are wood or metal objects.

      Delete
  3. I really enjoy your site. Could you point me to the location of where you got the annunciator from with the two columns of arrows? I would like to see a full ad describing them and their original cost. It would be great if it was from Western Electric. Thank you!

    ReplyDelete
    Replies
    1. To be honest I cannot recall the exact spot. I will give you a list of sources that are all available on google books that I am sure I found it from. Do a search in the book for annunciator or servant bell:

      The Electrical World, Volume 24 1894
      General Catalogue of Electrical Supplies, Western Electric Company 1904
      Illustrated Catalogue of Electric Light and Power Supplies 1892
      General Catalogue of Electric Light, Railway, Telephone and House Supplies: Twenty-fifth Anniversary Catalogue Electric Appliance Company - 1916
      Western Electrician, Volumes 3-4 1888
      General catalogue of electrical supplies Central Electric Co. (Chicago) - 1898

      Sorry I can't remember exactly off hand.

      Delete
  4. We have one the home we just moved into. Several doorbell like buttons on walls buzzing to box in kitchen with labeled rooms. Larger school type bell in attic space. You can see where floor buzzer was in dining room but it has been removed. The ones we have found all still work perfectly! So cool! Great article.

    ReplyDelete
    Replies
    1. Very cool and how lucky for you. Love them and use them as you can.

      Delete
  5. I have come across old "key" switches in several old houses that I have restored. Usually the plunger is missing -probably due to breakage or removed to reduce tripping hazard. I was lucky enough on one project to be working across the alley from a retired machinist who was able to recreate the part in his basement. Worked great! I am currently installing a floor switch in a house and was able to find a new one that I think will work. Although it is not authentic, I think is similar enough to pass.

    ReplyDelete
  6. Hi, could you tell me where you got that image of the three-bay annunciator with "Chief Clerk", "Cashier", and "Messenger" and the floor key?
    Thanks

    ReplyDelete
    Replies
    1. To be honest I cannot recall the exact spot. I will give you a list of sources that are all available on google books that I am sure I found it from. Do a search in the book for annunciator or servant bell:

      The Electrical World, Volume 24 1894
      General Catalogue of Electrical Supplies, Western Electric Company 1904
      Illustrated Catalogue of Electric Light and Power Supplies 1892
      General Catalogue of Electric Light, Railway, Telephone and House Supplies: Twenty-fifth Anniversary Catalogue Electric Appliance Company - 1916
      Western Electrician, Volumes 3-4 1888
      General catalogue of electrical supplies Central Electric Co. (Chicago) - 1898

      Sorry I can't remember exactly off hand.

      Delete
  7. Hello. Do you know of anybody who could restore a 1906 annunciator & burgler alarm

    ReplyDelete
    Replies
    1. Hello. I am sorry I don't. Perhaps someone who has some simple electrical skills. they aren't really complex items but just takes some time.

      Delete
  8. This comment has been removed by the author.

    ReplyDelete
  9. Do you know the typical voltage used on 1902 era annunciators in the US? Mine is made by the New England Engineering Company, NY ... self re-setting flags, and says Holtzer's Patent on case.

    ReplyDelete
    Replies
    1. I am sorry I don't. Typically these were powered with wet batteries and so the voltage was quite low. I have tested mine with a doorbell voltage and it worked fine. I will have to do more testing when I connect all the rooms to this one box.

      Delete
    2. I use a 9v battery on my system

      Delete

Post a Comment

Popular Posts